Gratuito
|
4,16 MB/Para Windows XP/Vista/7/8/8.1/10
| /Atualizado em 12/7/2017 | |
 |
10.173.956 downloads |
WinRAR es una excelente aplicación con soporte para compresión de archivos RAR yZIP y soporte de descompresion para CAB, ARJ, LZH, TAR, GZ, ACE, UUE, BZ2, JAR e ISO. Posee una interfaz gráfica bastante estructurada en la que se incluyen varias opciones interesantes como la de creación ficheros autoextraibles y multivolumenes, encriptado de datos, y algunas más. Además, para asegurarte de que tus documentos no serán extraídos por cualquiera, puedes incluir una contraseña al archivo comprimido para que sólo sea abierto por ti o por cualquiera que conozca la clave de acceso. WinRAR también ofrece la facilidad de incluir sus opciones en el menú contextual del Explorador de Windows, por lo que pinchando con el botón derecho en un archivo podremos realizar cualquiera de las acciones predeterminadas por WinRAR como puede ser Extraer aquí, Abrir con WinRAR, Añadir al archivo…, etc.
ESTA VERSIÓN CONTIENE LAS SIGUIENTES CORRECCIONES
Version 5.40
1. “Name encoding” submenu in “Options” menu allows to select
encoding for archived file names. This selection affects archive
browsing and extraction commands. You can use Ctrl+E keyboard
shortcut to access this menu quickly.
It can be useful when unpacking an archive without Unicode file names.
For example, unpacking a zip file with Chinese archived names
in Windows with Russian specified as a language for non-Unicode
programs.
2. If RAR recovery volumes (.rev files) are present in the same folder
as usual RAR volumes, archive test command verifies .rev contents
after completing testing .rar files.
If you wish to test only .rev files without checking .rar volumes,
you can select .rev files in WinRAR file list and apply “Test”
only to them or run:
rar t arcname.part1.rev
in the command line.
3. While NTFS file system permits file names with trailing spaces
and dots, a lot of Windows programs fail to process such names
correctly. If “Allow potentially incompatible names” option
in “Advanced” page of extraction dialog is turned off, WinRAR removes
trailing spaces and dots, if any, from file names when extracting.
This option is turned off by default.
Command line RAR also removes trailing spaces and dots when extracting
unless -oni switch is specified.
4. Previously “Synchronize archive contents” update mode
(-as command line switch) aborted if some of archiving folders
could not be read. Now WinRAR continues performing the operation
and preserves archived files matching unreadable folders.
5. WinRAR Shift+Del delete command can be used to delete folders
containing non-standard file names with trailing spaces and dots.
Usual delete to Recycle Bin also as Shift+Del in previous WinRAR
versions cannot delete such folders.
Unlike Del command, Shift+Del removes files permanently,
they are not moved to Recycle Bin. No additional prompts are issued
for files with read-only and system attributes.
6. You can drag folders from folder tree panel and drop them to
other programs or Desktop to copy or unpack them. Drag the archive
icon in tree panel root to unpack the entire archive.
7. “New folder” button in extraction dialog proposes a new folder name
based on archive name instead of generic “New Folder”.
8. Command line RAR version information:
a) if -iver switch is specified, RAR displays the version number
and quits. You can run just “RAR -iver”;
b) “x86″ or “x64″ is displayed in Windows RAR version information
both for -iver and in the copyright title for other commands.
9. If -p switch is used without optional parameter,
a password can be also set with file redirection or pipe.
For example: rar -p myarc.rar myfiles < psw.txt
10. Command line RAR treats ‘arcname.partN’ as ‘arcname.partN.rar’
if ‘arcname.partN’ does not exist and ‘arcname.part#.rar’ exists.
For example, it is allowed to run:
RAR x arcname.part01
to start extraction from arcname.part01.rar
11. Improvements in 7z archives support:
a) “Solid” status is correctly detected and reported for 7z archives
in WinRAR “Info” command;
b) dictionary size is displayed for LZMA and LZMA2 7z archives
in WinRAR “Info” command;
c) unknown packed size for files inside of 7z solid block is denoted
as ‘?’ instead of ‘0’ when browsing the archive contents in WinRAR.
12. Maximum comment length for RAR archives is increased from 64 to 256 KB.
Since SFX script commands are stored in archive comment,
it allows a longer main and license text in SFX archives.
13. Size of default WinRAR viewer font is scaled up properly
in Windows high DPI mode.
14. Switch -scul can be used to process big endian UTF-16 list files
as well, provided that they have a correct byte order mark.
Previously it allowed only little endian file lists.
15. Minimum supported Windows version is Windows XP SP3 now.
WinRAR will not run in Windows XP without service packs.
16. “Settings/File list/Allow all uppercase names” option is removed.
This option was intended to simplify transition from MS DOS to
Windows and is not needed anymore.
17. Bugs fixed:
a) WinRAR 5.31 x64 “Compress and email” command did not work
with Microsoft Outlook x64;
b) if WinRAR 5.31 version for one of right to left languages
was installed in Windows with English or other not right to
left system language, WinRAR could change Windows Explorer
layout to right to left;
c) if archive was stored in a folder without “Write” permission
and if archive contents was extracted with drag and drop to
a writable folder, WinRAR issued an unnecessary privileges
elevation prompt.
ESTA VERSIÓN CONTIENE LAS SIGUIENTES CORRECCIONES
Version 5.40
1. “Name encoding” submenu in “Options” menu allows to select
encoding for archived file names. This selection affects archive
browsing and extraction commands. You can use Ctrl+E keyboard
shortcut to access this menu quickly.
It can be useful when unpacking an archive without Unicode file names.
For example, unpacking a zip file with Chinese archived names
in Windows with Russian specified as a language for non-Unicode
programs.
2. If RAR recovery volumes (.rev files) are present in the same folder
as usual RAR volumes, archive test command verifies .rev contents
after completing testing .rar files.
If you wish to test only .rev files without checking .rar volumes,
you can select .rev files in WinRAR file list and apply “Test”
only to them or run:
rar t arcname.part1.rev
in the command line.
3. While NTFS file system permits file names with trailing spaces
and dots, a lot of Windows programs fail to process such names
correctly. If “Allow potentially incompatible names” option
in “Advanced” page of extraction dialog is turned off, WinRAR removes
trailing spaces and dots, if any, from file names when extracting.
This option is turned off by default.
Command line RAR also removes trailing spaces and dots when extracting
unless -oni switch is specified.
4. Previously “Synchronize archive contents” update mode
(-as command line switch) aborted if some of archiving folders
could not be read. Now WinRAR continues performing the operation
and preserves archived files matching unreadable folders.
5. WinRAR Shift+Del delete command can be used to delete folders
containing non-standard file names with trailing spaces and dots.
Usual delete to Recycle Bin also as Shift+Del in previous WinRAR
versions cannot delete such folders.
Unlike Del command, Shift+Del removes files permanently,
they are not moved to Recycle Bin. No additional prompts are issued
for files with read-only and system attributes.
6. You can drag folders from folder tree panel and drop them to
other programs or Desktop to copy or unpack them. Drag the archive
icon in tree panel root to unpack the entire archive.
7. “New folder” button in extraction dialog proposes a new folder name
based on archive name instead of generic “New Folder”.
8. Command line RAR version information:
a) if -iver switch is specified, RAR displays the version number
and quits. You can run just “RAR -iver”;
b) “x86″ or “x64″ is displayed in Windows RAR version information
both for -iver and in the copyright title for other commands.
9. If -p switch is used without optional parameter,
a password can be also set with file redirection or pipe.
For example: rar -p myarc.rar myfiles < psw.txt
10. Command line RAR treats ‘arcname.partN’ as ‘arcname.partN.rar’
if ‘arcname.partN’ does not exist and ‘arcname.part#.rar’ exists.
For example, it is allowed to run:
RAR x arcname.part01
to start extraction from arcname.part01.rar
11. Improvements in 7z archives support:
a) “Solid” status is correctly detected and reported for 7z archives
in WinRAR “Info” command;
b) dictionary size is displayed for LZMA and LZMA2 7z archives
in WinRAR “Info” command;
c) unknown packed size for files inside of 7z solid block is denoted
as ‘?’ instead of ‘0’ when browsing the archive contents in WinRAR.
12. Maximum comment length for RAR archives is increased from 64 to 256 KB.
Since SFX script commands are stored in archive comment,
it allows a longer main and license text in SFX archives.
13. Size of default WinRAR viewer font is scaled up properly
in Windows high DPI mode.
14. Switch -scul can be used to process big endian UTF-16 list files
as well, provided that they have a correct byte order mark.
Previously it allowed only little endian file lists.
15. Minimum supported Windows version is Windows XP SP3 now.
WinRAR will not run in Windows XP without service packs.
16. “Settings/File list/Allow all uppercase names” option is removed.
This option was intended to simplify transition from MS DOS to
Windows and is not needed anymore.
17. Bugs fixed:
a) WinRAR 5.31 x64 “Compress and email” command did not work
with Microsoft Outlook x64;
b) if WinRAR 5.31 version for one of right to left languages
was installed in Windows with English or other not right to
left system language, WinRAR could change Windows Explorer
layout to right to left;
c) if archive was stored in a folder without “Write” permission
and if archive contents was extracted with drag and drop to
a writable folder, WinRAR issued an unnecessary privileges
elevation prompt.
 |
|
 |
 |
 |  |
 |  |
 |
No hay comentarios.:
Publicar un comentario